Tms 2016 Supplemental Proceedings

Front Matter....Pages i-xvi
Front Matter....Pages 1-1
Anisotropic Mechanical Properties in a Big-Sized Ti-6Al-4V Plate Fabricated by Electron Beam Melting....Pages 5-12
Characterization of Microstructure and Mechanical Properties of Direct Metal Laser Sintered 15–5 PH1 Stainless Steel Powders and Components....Pages 13-19
Effect of Thermal Drift on the Initial Transient Behavior in Directional Solidification of a Bulk Transparent Model Alloy....Pages 23-30
Rapid Quench in an Electrostatic Levitator....Pages 31-34
Simulation of shrinkage-induced macrosegregation in a multicomponent alloy during reduced-gravity solidification....Pages 35-42
In Situ Investigation of the Effects of Gravity Level Variations on the Directional Solidification Microstructures During Parabolic Flights....Pages 43-50
Microstructural Evolution in Undercooled Al–8wt%Fe Melts....Pages 51-57
Degradation Study of High Melt Strength Polypropylene/Clay Nanocomposites in Environmental and Accelerated Conditions....Pages 61-67
Nanotube Sheet — Graphite Hybrid Nanocomposite for Damage Detection....Pages 69-76
Effect of Nano-Particle Addition on Grain Structure Evolution of Friction Stir Processed Al 6061 During Post-Weld Annealing....Pages 77-84
Enhanced Ductility with Significant Increase in Strength of As-Cast CNTs/AZ91D Nanocomposites....Pages 85-92
The Synthesis and Processing Self-Healing Structural Al/Mg Lamellar Composite Materials....Pages 93-100
Filler Surface Nature, Bead, Solution Viscosity and Fibre Diameter of Electrospun Particle-Reinforced Polylactide....Pages 101-108
Evaluation of Intermetallic Reaction Layer Formation Within Steel Encapsulated Metal Matrix Composites....Pages 109-117
Effect of Load and Grit Size on High Stress Abrasive Wear of Al-Mg-Si Hybrid Composites....Pages 119-125
Study on Mechanical Property of Porous Titanium by Adding Powder Carbon....Pages 127-133
Fabrication of Gamma-Irradiated Polypropylene and AgNPs Nanocomposite Films and Their Antimicrobial Activity....Pages 135-142
Natural Aging Effects in HMS-Polypropylene Synthesized by Gamma Radiation in Acetylene Atmosphere....Pages 143-150
Superaligned Carbon Nanotubes Reinforced Copper Nanocomposites with Enhanced Strength and Electrical Conductivity....Pages 151-158
Front Matter....Pages 159-166
Selective Laser Melting of TiB2/H13 Steel Bulk Nanocomposites: Influence of Nanoscale Reinforcment....Pages 167-167
In-Space Manufacturing Baseline Property Development....Pages 171-176
Using Powder Cored Tubular Wire Technology to Enhance Electron Beam Freeform Fabricated Structures....Pages 177-181
Microstructure Evolution of Martensitic Stainless Steel in Laser Hot Wire Cladding With Multiple Heating Passes....Pages 183-189
Effect of Printing Orientation on Strength of 3D Printed ABS Plastics....Pages 191-198
Verification of Numerically Calculated Cooling Rates of Powder bed Additive Manufacturing....Pages 199-204
Beta-Type Titanium Alloys for use as Rods in Spinal Fixation Devices....Pages 205-212
Effect of MMT Nanoparticle Clay on Flexural Properties of Polymer Based BisGMA/Tegdma Resin....Pages 215-221
Fatigue Performance of New Developed Biomedical Ti-15Mo Alloy with Surface Modified by TiO2 Nanotubes Formation....Pages 223-230
First Principles Investigation on TiAl3 Alloys Substitutively Doped with Si....Pages 231-235
Effect of Strain on the Physical Properties of Lanthanum Nickelate....Pages 239-245
Hydrogen-Induced Core Structures Change of Screw and Edge Dislocations in Tungsten....Pages 247-252
Validation of BISON Calculation of Hydrogen Distribution by Comparison to Experiment....Pages 253-259
Effect of K-Point Convergence on Derived Properties for Pure Crystals....Pages 263-272
Quantifying Model-Form Uncertainty in Molecular Dynamics Simulation....Pages 275-282
Atomistic Study of Carbon Nanotubes: Effect of Cut-Off Distance....Pages 283-292
Bayesian Calibration of a Physical Model for Plastic Flow Behavior of Trip Steels....Pages 293-300
Homogeneous Nucleation and Inner Structure Evolution in Nucleus Fe from Classic Molecular Dynamics Simulation....Pages 301-316
Anisotropy of Crystal-Melt Interface of BCC-Fe and FCC-Fe from Molecular Dynamics Simulation....Pages 319-326
Thermal Decomposition Kinetics of Manganese Carbonate in the Process of MnZn Ferrite Preparation....Pages 327-334
Front Matter....Pages 335-342
Solid-Liquid Phase Transitions of FCC-Al and HCP-Mg Nanoparticles....Pages 167-167
A Discrete Dislocation Model of Creep in Single Crystals....Pages 343-350
Study of the Temperature Effects on Solid-Liquid Anisotropic Interfacial Energy....Pages 351-358
Application of MIVM for Sn-Ag and Sn-In Alloys in Vacuum Distillation....Pages 359-366
Experiments and Kinetics Modeling for Gasification of Biomass Char and Coal Char under CO2 and Steam Condition....Pages 367-374
Optimization of Main Factors for Decarbonizing Ratio of TiB2 Powders by Reverse Flotation Using Response Surface Methodology....Pages 375-382
A Novel Process for Treating with Low Grade Zinc Oxide Ores in Hydrometallurgy....Pages 383-390
A Study of Taguchi Method to Optimize 6XXX Series Aluminium Anodic Oxide Film’s Hardness and Investigation of Corrosion Behaviors of Oxide Films....Pages 393-400
Anticorrosion Performance of Solanum Aethiopicum on Steel-Reinforcement in Concrete Immersed in Industrial/Microbial Simulating-Environment....Pages 401-408
Artificial Neural Network Modeling to Predict Hot Deformation Behavior of Zn-Al Alloy....Pages 409-416
Behavior of Tire Derived Pre-Functionalized Carbon Black for Uranium Adsorption....Pages 417-424
Effect of Temperature on the Mechanical Behaviour of Ni-Ti Shape Memory Sheets....Pages 425-432
Evaluation of Forged Aluminum Matrix Composites Reinforced with Carbon Nanotubes (CNTs) Fabricated by Composite Gas Generator (CGG) Process....Pages 433-439
Gamma and Neutron Shielding Behavior of Spark Plasma Sintered Boron Carbide-Tungsten Based Composites....Pages 441-448
Image Analysis Investigating Porous Structures of Carbon Cathodes Materials and Melts Penetration....Pages 449-456
Micro-Truncated Cone Arrays for Light Extraction of Organic Light-Emitting Diodes....Pages 457-463
Mould Filling Ability Characterisation of SIMA Produced 6063 Alloy....Pages 465-472
One-Step Preparation of TiB2-C Composite by DC Arc Furnace....Pages 473-479
Si and SiCu Three Dimensional Sculptured Films as Negative Electrodes for Rechargeable Lithium Ion Batteries....Pages 481-486
Front Matter....Pages 487-492
Thickness Effect on the Three-Dimensional Sculptured SiCu Thin Films Used as Negative Electrodes in Lithium Ion Batteries....Pages 493-500
An Integrated Model for Prediction of Yield Stress in Al-7Si-Mg Cast Alloys....Pages 167-167
Experiences with ICME Information Infrastructures for Applying Materials Models in Sequence to Give Accurate Macroscopic Property Prediction....Pages 501-508
D2C — Converting and Compressing Discrete Dislocation Microstructure Data....Pages 511-521
Determination of Bending Limit Curves for Aluminium Alloy AA6014-T4: An Experimental Approach....Pages 523-530
135° Clock Rolling: An Approach to Improve the Microstructure and Texture of Tantalum Used for Sputtering Target....Pages 531-538
Evolution Law of Grain Size of High Alloy Gear Steel in Hot Deformation....Pages 541-547
Experimental Investigation of the Sm-Rich Side in Sm-Zr System....Pages 549-557
Fabrication and Qualification of Small Scale Irradiation Experiments in Support of the Accident Tolerant Fuels Program....Pages 561-566
Development of Engineering Parameters for Low Pressure Diffusion Bonds of 316 SS Tube-to-Tube Sheet Joints for FHR Heat Exchangers....Pages 567-571
The Microstructure and Mechanical Properties of Nanometer Al2O3/Cu Composite Fabricated by Internal Oxidation....Pages 575-582
The Roles of Oxide Interfaces and Grain Boundaries in Helium Management in Nano-Structure Ferritic Alloys: A First Principles Study....Pages 583-588
The Stability of the Moving Boundary in Spherical and Planar Geometries and Its Relation to Nucleation and Growth....Pages 591-596
Effect of Pulse Magnetic Field on Isothermal Bainitic Transformation Process in Cr5 Steel....Pages 599-606
Corrosion Effects on Mechanical Properties of Sensitized AA5083-H116....Pages 609-617
The Effect of Initial Microstructure on the Mechanical Properties of Bi-lamellar Ti-6Al-4V....Pages 619-624
Some Steps towards Modelling of Dislocation Assisted Rafting: A Coupled 2D Phase Field — Continuum Dislocation Dynamics Approach....Pages 625-632
Effect of Heating Types on the Undercooled Solidification Microstructure of Co76Sn24 Eutectic Alloy....Pages 633-640
Mechanical Properties of 5000 Series Aluminum Alloys Following Fire Exposure....Pages 641-648
Effect of Concurrent Microstructure Evolution and Hydrogen Level on Flow Behavior of Near Alpha Ti-Alloy....Pages 649-656
Front Matter....Pages 657-664
Using Temporary Hydride Formation in Metastable Beta Titanium Alloys to Improve the Microstrcture....Pages 665-672
Numerical Simulation of Solidification Microstructure with Active Fiber Cooling for Making Fiber-Reinforced Aluminum Matrix Composites....Pages 167-167
Assessment of Tribological Properties of Cast and Forged Ti-6Al-7Nb and Ti-6Al-4V Alloys for Dental Applications....Pages 673-684
Solid State Reaction of Nd2Fe14B and Carbon....Pages 685-692
Production of Titanium Hydride Powder by Leaching of Aluminum and Silicon Impurities from Reduced Upgraded Titania Slag for Low Cost Titanium Production....Pages 693-700
Mechanical Properties and Microstructure of PM Ti-Si3N4 Discontinuous Fibre Composite....Pages 703-709
Microstructure Evolution and Mechanical Properties Investigation of Friction Stir Welded AlMg5-Al2O3 Nanocomposites....Pages 713-719
Titanium Foam for Cancellous Bone Implant Prepared by Space Holder Technique....Pages 721-728
Thin Films and Coatings for Absorptive Removal of Antimicrobials, Antibiotics, and other Pharmaceuticals....Pages 729-736
Effect of Post-Heat Treatment on the Electrochemical Performance of Sandwich Structured Cu/Sn/Cu Electrode....Pages 737-744
Role of Membrane Properties on Charge Transport Across Conjugated Oligoelectrolyte Modified Phospholipid Bilayers....Pages 747-754
The Investigation on the Intermetallic Layer of Hot Dipping Al-10Si Alloy with 22MnB5 and DC51 Substrate....Pages 755-762
The Wetting Behavior of Fe-Si and Fe-Mn Alloy with Al-10%Si Coating....Pages 763-769
Improving the Performance of Nb-Silicide Based Refractory Alloys Through a Novel Cold Crucible Directional Solidification....Pages 771-777
Back Matter....Pages 779-786
....Pages 789-796